P.U Paints possess
a combination of properties that are not attainable
with any other coating system. In addition to
the low temperature cure feature, there are
three additional properties worth noting
- Film mechanical properties
- Chemical resistance
- Resistance to degradation from light and
weathering
PROPERTIES
- Excellent weathering resistance.
- High water, solvent and chemical resistance.
- Excellent color and gloss retention.
- Highest standards of chalking resistance.
- Outstanding corrosion protection properties.
- Exceptionally high scratch, abrasion and
impact resistance.
- Tough elastomeric properties combined with
high hardness.
- Adjustable flexibility over a wide range
and coatings from certain formulations.
- No tendency to embrittle at low temperatures
or upon ageing.
SURFACE PREPARATION
The surface to be painted should be clean ,
dry and free from dirt and grease. Remove all
powdery and flaking paint.Rub down old painted
surface before applying the 2 K.P.U. System.
COLOUR RANGE
Available in white and a wide range of pleasing
, ready to use shades.
METHOD OF APPLICATION
By brush, spray. For spray application the
conistency should be suitably adjusted with
the use of 2 K.P.U thinner
DRYING
Under normal conditions temperature and humidity
- surface dry - 20-25 minutes
- Tack dry - 3-4 hours
- Recoatability - after 12-16 hours
MIXING RATIO
Component A: Component B :: 4:1 (Base) (Harder)(Volume
Basis)
POT LIFE
6-8 hours under normal conditions of temperature
and humidity
THINNER
2K, P.U Thinner
THEORETICAL COVERING CAPACITY Sq mts / Litre
/ Coat
Depending upon the film-thickness on smooth
non-absorbent surface
Spraying viscosity by F/c No. 4@ 30°.
C 25-30 seconds
Brushing viscosity by F/c No. 4@30°.
C 60 + or _ 5 secs.
Packing - 20 litres, 4 litres
and 1 litre
APPLICATION AREAS
|
